Digiprog 3 V4.94 odometer correction digiprog III Mileage

Digiprog 3 is obd2repair 2016 latest version odometer correction tool. Digi prog 3 odometer correction now is v4.94 version. Digiprog III tachopro odometer tool with full software

Top Quality Digiprog 3 odometer correction digiprog III Mileage correction with full software

Digiprog 3 digiprog III tachopro odometer tool multi-language OBD-II repair tool

version: v4.94

Notice: Never update the device, thanks

Digiprog 3 digiprog III tachopro odometer correction obd2 repair tool enclosed Intelligent accessories and extensive manuals.

Digiprog 3 is multi-language OBD-II repair tool support Deutsch, English, Espanol, French, Portuguese, Italiano, Turkish, Nederlands.

Digiprog III support for Alfa, for Aston Martin, for Audi, for Bentley, for BMW, for Cagiva Raptor, for Chevrolet, for Chrysler, for Citreon, for Daimler Benz, for Dodge, for Ferrari, for Fiat, for Ford, for GM, for Honda, for Hyundai, for Jaguar, for Kia etc.

Top reasons to choose Digiprog 3 4.94:

1) . Universal mileage programmer with best price
Digiprog 3 can be used to change many different brands vehicles in the market. Compared with other universal odometer programmer like Digimaster 3 and USA PROG, digiprog 3 is more widely for individuals.

2). Updatable version, software is updated by email

3). Multi-language: Deutsch, English, Espanol, French, Portuguese, Italiano, Turkey, Nederlands

4). Free download: Digiprog 3 4.94 Supported vehicle list

V4.94 Digiprog 3 add models:

-A3 new version
For Ford :
-F150 24C16
-Falcon 24c02
For Mercedes :
-W176 new version
-W204 new version Diag
-w212 new version Diag
For Opel :
-Insignia new version

-Astra new version

V4.93 digiprog 3 odometer programmer:
 
For Audi :
A3 Diag new version
A6 Diag new version
A8 Diag new version
For Mercedes :
R 172 Diag new version
R 231 Diag new version
W 212 Diag new version
For Ford :
Kuga Transit
For VW :

Amarok Polo Johnson

V4.94 Digiprog3 Odometer Master Programmer Feature:
 
1. Power-On Password:1
2. Newest Version: V4.94
3. Supported Languages: Deutsch, English, Espanol, French, Portuguese, Italiano, Turkish, Nederlands.
4. Worldwide leader in digital speedo programming and correction software.
5. Quality standards are second to none.
6.Years of experience in digital vehicle engineering.
7. Professional technical service.
 
Digiprog 3 V4.94 Other Features:
 
Service interval adjustments and settings
 
Assyst processing
Fault memory read-erase
EEPROM programmer
Integrated PC communication

Some Important Tips for Using Digiprog 3:
 
1. Always connect the Eeprom to the ST01 or ST04 before you connect to the DigiProg this will avoid Electro static feedback (ESD).
2. Never solder the connections whilst the lead is connected to the programmer, this will damage the DigiProg.
3. Always keep your DigiProg in its case when not in Use & keep it in a dry environment at night (don’t leave it in the trunk of your car) If you are using solvents to remove lacquers’ from Eeprom’s ensure that they are cleaned 4. completely as the solvent can damage the clips.
 
Digiprog 3 Menu:
 
1. EEPROM Menu
 
The first option on the main menu is the Eeprom menu. Reading, writing and saving Eeprom information is all done using this menu. A more detailed guide to using this menu follows later on in the introduction.
 
2. CAR/TRUCK Menu
 
This is the menu you will use for correcting and reprogramming vehicles. Manufacturers are set out in alphabetical order and models of vehicles are set out in a simple sub-menu format.
 
3. Motorcycle Menu
 
This menu is the same as the CAR/TRUCK menu but is used for reprogramming motorcycles.
 
4. Special Functions Menu
 
The special functions menu is for use only by official DigiProg dealers.
 
5. Setup Menu
 
This menu is where settings on your DigiProg can be changed. Language, password, brightness, volume, and the time/date can all be set and changed in this menu. You can also change whether your machine is working in kilometres or miles.
 
Using the EEPROM Menu:
 
On some of the vehicles you will come across, an eight pin Eeprom chip will be used to store the vehicle data. These chips hold vital information from the vehicle such as ignition and immobiliser codes. Loss of this information could result in anything from minor faults, to major faults involving the vehicle not starting and having to be taken to the main dealer. This is why it is very important to read and save the original information from the Eeprom before programming, this way if any errors do occur you can always return to the point you started.
 

The process of reading and saving this information is very simple. The Eeprom chip itself will have a mask number printed across the top of it, for example a widely used chip is a 93C46. You can connect the chip to your DigiProg by using adaptor ST01 or ST04. Most chips are surface mount eeproms which will use ST01, but the larger DIL chips will use ST04.

Digiprog 3 manual

DigiProg III Digiprog 3 manual.pdf

Digiprog 3 Package:

• One unit of  Digiprog 3 Main interface
• One unit of OBD2 cable for Digiprog 3 

• Many unit of adaptors and cables for Digiprog 3 

Customers Asked Questions:

Q: What is is the package, does this one includes HC-12?
A: The whole package is shown as the photo. Our digiprog 3 do not has HC-12.

Q: Does this parcel has the ST01 and ST04 cable, i mean the cable, not for board shape.

A: Yes. It has the ST01 and ST04 cable, not board shape.

Digiprog 3 4.94 Software Display:

Digiprog 3 Including All cables and apaptors:

have cd and 04/2 cable  too.

Digiprog-III/3 Password: 1

OBD2Repair Offer

Wholesaler Discount: Welcome to OBD2Repair " VIP Wholesaler Order " Zone

Shipping Cost & Payment: Here is the details " shipping " " Payment "

How to order: Here is the instruction " Shopping Guide "

Tracking No.: Will email you the tracking no. once shiped, can track your parcel delivery on the net

Special Request: Pls email info@obd2repair.com

Technical Support: Free

Customer Support

     +86 13728823163

   obd2repair

   obd2repair@hotmail.com

    info@obd2repair.com