For Toyota 2012 RAV4 Smart key Programmer RAV4 ECU programmer

RAV4 Smart key Programmer is smart key programming tool for 2012 Toyota RAV4. RAV4 ECU programmer can program the key when all keys lost. For Toyota 2012 RAV4 programmer without any software.

For Toyota 2012 RAV4 Smart key Programmer RAV4 ECU programmer

Smart Key Programmer for 2012 TOYOTA RAV4 can program the key when all keys lost, then demolish certification ECU(Anti-theft Box). Without shoring the BOD connection synchronization.

For Toyota 2012- RAV4 Smart key use for Toyota’s latest anti-theft system. Key full- lost need demolish certification ECU((Anti-theft Box) and the Smart ECU(Intelligent Anti-theft Box ) to program. According to for toyota 4S shop maintenance program, you need to replace the ECU ( Anti-theft Box ) and Smart  ECU( Intelligent control Box ) and the whole  lock.
 
The user guide of RAV4-Smart Key Programmer:
 
Please try to use ordinary programmer to read data 93C46 and save data 93C86, and then operate according to the following steps.
 
1. Remove the ECU anti-theft box, weld the Storage IC－93C46 in for Toyota programming corresponding position. Connect the USB cable to the computer, indicator light will light up in slow flash state. Press the switch power, the indicator light will start to flash in fast state. After 10 seconds the indicator light is off, it means the operation has been successful. Please put the Storage 93C46 back to the anti-theft box.

2. Remove the Intelligent anti-theft box, weld the Storage IC－93C86 in for Toyota programming corresponding position. Connect the USB cable to the computer, indicator light will light up in slow flash state. Press the switch power, the indicator light will start to flash in fast state. After 10 seconds the indicator light is off, it means the operation has been successful. Please put the Storage 93C86 back to the Intelligent anti-theft box.

3. Equip well anti-theft box, Intelligent anti-theft box in the car and then you can turn on the power directly, and press the ignition switch on the light meter, use CI-PROG 300 key programmer then you can increases new smart card directly. the instrument will prompt the operator, allowing you to use the original key close to ignition switch, you simply take one original key and close to ignition switch, the car will  make " Beep" one sound, one will be successful, and the second is the same. After smart key increases successfully, remember to first open the switches, so that steering lock ECU actions before they can press the remote device, generally increases with the original data modification smart card can directly start the car, and if steering ECU will move after playing motor vehicle vain, we must shorting OBDII 4 13 feet, synchronous 45 minutes you can start car.
 
The picture about RAV4 Smart key programmer:

1. This is ECU anti-theft box position after Toyota cars workbench be removed. It is in front of Blower.

ECU anti-theft Box

 2. Intelligent control box in the back of the heater box. Remove carefully.

Intelligent Anti-theft Box

OBD2Repair Offer

Wholesaler Discount: Welcome to OBD2Repair " VIP Wholesaler Order " Zone

Shipping Cost & Payment: Here is the details " shipping " " Payment "

How to order: Here is the instruction " Shopping Guide "

Tracking No.: Will email you the tracking no. once shiped, can track your parcel delivery on the net

Special Request: Pls email [email protected]

Technical Support: Free

Customer Support

     +86 13728823163

   obd2repair

   obd2repair@hotmail.com

    [email protected]