HU66V.2 Vag GEN 1 2 3 smart 2 In 1 Locksmith tools

HU66V.2 found on: VW, Audi, Skoda, Seat and Ford(Europe)

how to use HU66V.2 Vag GEN 1,2,3 smart 2 In 1 Auto Pick and Decoder-obd2repair.pdf

Detail for HU66.2 in 1 Decoder and pick tool as follow:

Open Sequence:

When use HU66v.2 2-in-1 decoder and pick tool, first enter the working part of 2 in 1

decorder and pick tool into the button of lock cylinder.then unfold the driven lever of 2-in-1 decoder and pick tool,Meanwhile use appropriate Strength hold on it by left hand.(If work under dark light then you can open the light)

First use your right hand hold the lever A to pick 15.48 wafer, At the same time the Probes will move, And then use the lever B to pick 23,67 wafer, And these 4 pieces wafers need to be picked repearedly untill the lock be opened.

At this moment the lock cylinder will turn around about 90 degree.

Decoder Sequence:

After the lock be opened then start to read code.First read the Side "A" 12,56 wafer and then read the Side "B" 34,78 wafer,When you read the 12.56 wafer position meanwhile in the body of 2-in-1 decoder and pick will show you the wafer position and depthe of wafer, Therefore you can read out the depth of wafer(the key way)

For exmaple. Side "A" number 1 wafer position read out is 3.number 2 wafer position read out is 2.number 5 wafer position read out is 4.number 6 water position read out is 2.So side "B" read out the codes.

TheSequence is 32.42. And the read the side "B" Side "B" the number 3 wafer position read out is 1, number 4 wafer position read out is 3,number 7 wafer position read out is 2.number 2 wafer position read out is 1. So the side "B" read our the codes the sequence is 13.21

Side "A" (12 56) the permutation of wafer position

Side "A" (32 42) the permutation of wafer position (key way)

Side "B" (34 78) The permutation of wafer position

Side "B" (13 21) the permutation of wafer,then prepare 2 pieces special key which only use for 2-in-1 decoder and pick tool(the special keys already marked the depth line).And then use key cutter to cut the special key.

First take one piece cut for Side A's codes, Side "A" number 1 position is 3, number 2 position is 2, number 5 position is 4, number 6 position is 2. And then take another 1 piece special key cut for Side "B". Side B number 3 position is 1, number 4 position is 3, number 7 position is 2 number 8 position is 1.

Finish the cutting then take one piece main key (HU66,only one piece) put in the middle of these two pieces special keys what already be cut.And these two pieces special keys the key way where have been cut must coincide...

Now an unbroken key have been make and it can use for open the lock, so opne the lock and decoder finish.

The VolksWagen Hu66, there have two models. one is HU66,  another is HU66v.2

Volkswagen, Passat, Magotan, Sagitar, Audi, Skoda,Bora,Golf,Gore,etc Series.