Home ::  IMMO Emulator Simulator ::  JLINK V8 Simulator ARM USB with K tag Ktag Master NXP Fix Chip Token Renew
首页广告VXDAS
JLINK V8 Simulator ARM USB with K tag Ktag Master NXP Fix Chip Token Renew

JLINK V8 Simulator ARM USB with K tag Ktag Master NXP Fix Chip Token Renew

SKU:OBD1538

  In Stock
1 0
(1 Reviews)

Regular Price: $47.99

Weight:  
0.2kg

Qty:

Total Price:$39.99

Payment Methods

Buy more related tools and Save more!
Jlink Emulator V9 JLINK JTAG SWD Emulator Jlink ARM simulator
Jlink Emulator V9 JLINK JTAG SWD Emulator Jlink ARM simulator   More Details »
Buy it Now: $49.00
Quantity:  
Add to Cart
V2.13 KTAG Master K TAG FM V6.070 ECU Programming Tool with 500 Tokens
V2.13 KTAG Master K TAG FM V6.070 ECU Programming Tool with 500 Tokens   More Details »
Buy it Now: $89.99
Quantity:  
Add to Cart
Ktag ecu tool update error fix nxp chip Ktag tokens reset
Ktag ecu tool update error fix nxp chip Ktag tokens reset   More Details »
Buy it Now: $25.97
Quantity:  
Add to Cart
KTM100 KTAG Master V2.13 FW V7.020 KTM100 ECU Programming Tool with Unlimited Token
KTM100 KTAG Master V2.13 FW V7.020 KTM100 ECU Programming Tool with Unlimited Token   More Details »
Buy it Now: $398.00
Quantity:  
Add to Cart

JLINK / J-LINK V8 Simulator ARM USB JTAG is full version and support firmware updates. J-Link emulation is SEGGER company ARM core chip to support the launch of the JTAG emulator. J-LINK V8 supports ARM7, ARM9, ARM11, Cortex-M3 core, ADS, IAR, KEIL development environment


JLINK V8 Simulator ARM USB JTAG J-Link ARM V8.00

JLINK J-LINK V8 Simulator ARM USB JTAG


V8.0  version of the improved version of the relative:

J-Link emulation is SEGGER company ARM core chip to support the launch of the JTAG emulator.


J-Link ARM Features:

* IAR EWARM integrated development environment seamlessly connected JTAG Emulator
* Support all ARM7/ARM9 core chips, as well as cortex M3, including Thumb mode
* Support for ADS, IAR, KEIL, WINARM, REALVIEW almost all of the development environment
* Download speeds of up to ARM7: 600kB / s, ARM9: 550kB / s, through the DCC up to 800 kB / s
* The maximum JTAG speed 12 MHz
* Target board voltage range 1.2V-3.3V, 5V compatible
* Auto speed recognition
* Monitoring all JTAG signals and target board voltage
* Fully plug and play
* Use the USB power supply (but not the target board power supply)
* With a USB cable and 20-core flat cable
* Support multi-device JTAG serial connection
* Standard 20-core JTAG emulation connector
* Optional 14-core JTAG emulation connector
* Optional adapter for 5V targets board
 
J-Link support for ARM cores:

* ARM7TDMI (Rev 1)
* ARM7TDMI (Rev 3)
* ARM7TDMI-S (Rev 4)
* ARM720T * ARM920T
* ARM926EJ-S
* ARM946E-S
* ARM966E-S
* ARM11
* Cortex-M3

Product Specifications

USB power supply, the whole current <50mA
USB Interface USB 2.0 full speed 12Mbps
Target board interfaces
JTAG (20P)
J-Link and target board serial data transfer speed between the 12MHz maximum
Supported target board voltage 1.2 - 3.3V, 5V compatible
Target board power supply voltage 4.5 - 5V (provided by the USB 5V)
Target board power supply current max 300mA, with overcurrent protection
°C ... +60°C" onmouseout="this.style.backgroundColor>Operating temperature +5 ° C ... +60 ° C
°C ... +65 °C" onmouseout="this.style.backgroundColor>Storage temperature -20 ° C ... +65
Humidity <90%
Size (without cables) 100mm x 53mm x 27mm
Weight (without cable) 70g
EMC EN 55022, EN 55024
Supported Operating Systems Microsoft Windows 2000
Microsoft Windows XP
Microsoft Windows XP x64
Microsoft Windows 2003
Microsoft Windows 2003 x64
Microsoft Windows Vista

Microsoft Windows Vista x64

 


OBD2repair.com Kindly Note: 

K-TAG NXP CHIP is empty, you need write the data on this NXP LPC2478F** chip by JTAG J-LINK simulator and your K-TAG main unit, we will supply bin file and user guide, and need The soldering Station to solder NXP LPC2478F** chip on your K-TAG main unit.


This K-TAG Repair chip will reset the tokens times of K-TAG clone chip tuning tool



NXP Chip for k-tag programmer update and damaged CPU FIX

This is the CPU fix chip for K-TAG. If you update your k-tag, then please choose this chip to fix your K-TAG.



When will you need KTAG K-TAG ECU Programming Tool CPU FIX chip ??

These situation, you need to use this CPU NXP chip to DIY repair your K-TAG ECU Programming Tool

1) K-TAG is updated by internet
K-tag ECU Programming Tool  can not be updated via online. When you use K-TAG, please disconnect the internet with your computer. Otherwise it will prompt you to update it. If you update the firmware of K-TAG, please use this repair chip to change the broken chip. Then your K-TAG will be fixed and go on to use.

2) Your other wrong operation, the destroy K-TAG NXP chip.
Usually this situation is rare.

How many tokens does this K-TAG NXP chips have?

About 500 tokens. Usually ordinary ECU does not need tokens when programming, only special ECU types needs. So 500 tokens can be used for a long time.



JLINK V8 VS V7

(1) improving the SWD interface circuit, the use of counterfeit JLINK V8 JTAG debug debug mode can be normal when debugging CORTEX-M3 core chips will not use SWD functionality V7 hardware SWD part with the V8 not the same, if forced to switch to SWD mode, JLINK the main chip will be destroyed! JLINK V8 interface circuit using two-level converter chip, using a level converter chip will be fake V8!

(2) V8.0 using two-color LED can indicate more work status, V7.0 only an LED indicator light

(3) to optimize the firmware structure and function of the firmware upgrade bootloader area to move to double the size of the application area. Easy to add new features;

(4) support for ARM11 better and faster than JLINK V7, is the first choice for ARM11.
 
Other differences:

1) J-Link V8 use AT91SAM7S64, expanding the capacity of Flash and SRAM to facilitate future upgrades;

2) J-Link V8 improves the SWD interface, an increase of driver chips, (V6 and V7 in the SWD is a direct quote from the pin to the target CPU board);
 
3) J-Link V8 SWD improved control methods, V7 is the I / O direct-drive, V8 with a special method, there is not effective anyway V8's SWD velocities slower than the V7
 
4) J-LinkV8 have three lights, one directed USB Communications, a direct target CPU, reset state, a direct 5V output is turned on V7 only 1 USB communication indicator
 
5) J-Link V8's firmware update process is not DLL, and can not write the same as V7 Bootloader on a simple easy to crack V8's Bootloader need to implement USB device connectivity;


JLINK V8 summary

J-Link emulation is SEGGER company ARM core chip to support the launch of the JTAG emulator.
With the IAR EWARM, ADS, KEIL, WINARM, RealView and other integrated development environment supports all ARM7/ARM9 core chip simulation
Through RDI interface and the integrated development environment for seamless connectivity, easy, convenient connections
Easy to learn, is learning and developing ARM best and most practical development tools.


Jlink V8 emulator Package

  • 1x Jlink V8 emulator
  • 1x 20P line of a standard JTAG
  • 1x USB cable

  • 1x Ktag NXP Fix Chip


OBD2Repair Offer

Wholesaler Discount: Welcome to OBD2Repair " VIP Wholesaler Order " Zone

Shipping Cost & Payment: Here is the details " shipping " " Payment "

How to order: Here is the instruction " Shopping Guide "

Tracking No.: Will email you the tracking no. once shiped, can track your parcel delivery on the net

Special Request:
Pls email [email protected]

Technical Support: Free


Customer Support

 

     +86 13728823163

   obd2repair

   obd2repair@hotmail.com


Notice: After you place order, pls reply confirm email send by [email protected] asap for us to arrange ship for you, thanks