Home ::  OBD2Repair News ::  How to made Benz Star C3 work as Mercedes SD Connect C4

How to made Benz Star C3 work as Mercedes SD Connect C4

How to made Benz Star C3 work as Mercedes SD Connect C4

Benz Star C3 is obd2 repair diagnostic tool for Mercedes Benz Trucks and Cars. Mercedes SD Connect C4 is new version Mercedes Benz diagnostic tool. Want your old Benz Star C3 work as Mercedes SD Connect C4?

If you have old Mercedes Star Diagnosis C3

Mercedes Star Diagnosis C3 MB Star Compact 3 Benz Star C3

and want use new Mercedes SD Connect C4

Mercedes SD Connect C4 MB Star diagnosis Compact 4 Benz SD C4

What should you do?

Just need change Benz diagnosis DAS Setting!

Here OBD2Repair share the solution of made Benz Star C3 work as Mercedes SD Connect C4 with you

Solution 1 :

Convert MB Star C3 PartD (C3) To SD connect (C4) :

download Convert_C3_to_C4 tool.rar, and just run it on your MB star c3 Diagnosis software.

then:  Set local-connect                    IP to: 172.29.127.119/255.255.0.0
                                           wireles IP:192.168.2.221/255.255.255.0

Solution 2 :

Before you try to running MB Starc Xentry with your SD connect C4 Multiplexer Connected,

replace the attached file (cal.sli) in F:programmeXentrybinllist and make it Read Only.]

download Cal.sli

you also can modify the cal.sli by youself.

To switch from PartD MB Star c3 to SD connect C4, you making these few simply changes:

1. In your F:ProgrammeDASbin folder in your Cal.ini file this:

For PartD (C3) Mux:

[SERVER]
REPORT=0
PLATFORM=PART_D2

For SD connect (C4) Mux:

[SERVER]
REPORT=0
PLATFORM=PART_T (or optional _W for Wi-Fi ONLY communication)

2. In your Windows MAIN folder and in your HHTWin.ini file this:

For PartD (Star C3) Mux:

[STARTUP]
SLAVE=PARTD2

For SDconnect (C4) Mux:

[STARTUP]
SLAVE=PARTT2

Also you making your necessary configurations about Serial Port or LAN Network or Wi-Fi Network
(depend witch Benz diagnostic Mux you will using) and NOTHING ELSE!

Post A Comment