Home ::  OBD2Repair News ::  UNI-T Clamp Meter Digital Clamp Multimeters Instructions

UNI-T Clamp Meter Digital Clamp Multimeters Instructions


UNI-T Clamp Meter Digital Clamp Multimeters Instructions


UNI-T Clamp Meter is Digital clamp meters devices used to measure current in a circuit. Unlike regular meters, the Digital Clamp Multimeters does not put the meter into the circuit, but measures the field induced by a current passing through the clamp. Digital clamp meter is suitable for moderate (<480V) voltage and current applications

OBD2Repair offer 4 kinds UNI-T Clamp Meter as below
UT208 Unit Clamp Meter UNI-T UT208 Digital Clamp Multimeter
UT208 Unit Clamp Meter UNI-T UT208 Digital Clamp Multimeter
UT200C Unit Universal Meter Unit UT200C AC DC Clamp Meter
UT200C Unit Universal Meter Unit UT200C AC DC Clamp Meter
Unit UT221 clamp meter UT221 AC / DC digital clamp meter
Unit UT221 clamp meter UT221 AC / DC digital clamp meter
UT242 harmonic clamp meter Unit UT242 Clamp ampere multimeter
UT242 harmonic clamp meter Unit UT242 Clamp ampere multimeter

Instructions about Measuring Current with a Digital Clamp Meter

1. Remove power from the circuit, if possible. Working on a hot circuit involves extra risk to the user and all equipment involved.

2. Isolate a wire carrying the current you wish to measure.

3. Open the clamp portion of the meter and then close it around the wire (and only that wire) you wish to measure current passing through.

4. Set the clamp meter to read the current type (AC or DC) and the expected range in milliamps or amps. If you don't know the range, guess high, and dial down as needed.

5. Return power to the circuit and read the digital display, writing the value down to avoid repeating the process. If the reading fluctuates, give it a minute to settle down.

6. Remove power from the circuit. Then remove the clamp meter.

Post A Comment