Renault AdBlue Emulator box Adblue System Emulator

Renault AdBlue Emulator is obd2repair Adblue Remove Tool. Renault Adblue System Emulator work for renault Trucks and other heavy vehicles. Renault AdBlue Emulator box bypasses electronic module of the Adblue system on vehicle.

Renault AdBlue Emulator box Adblue System Emulator

Renault AdBlue Emulator box Adblue Remove Tool

Renault AdBlue Emulator supported Renault Trucks and other heavy vehicles

RENAULT AdBlue Emulator Installation

The connections details diagram and wire colours refer to RENAULT PREMIUM 450 Year 2008, but the main procedure of the minusblue module does not vary.

Before proceeding make sure no faulty codes are memorised in the original ECU, ADBLUE liquid is higher than the reserve level and the truck batteries Are disconnected from the system.


WIRING
---------
5 conductors:-

1) RED(+15). To be connected to a 24V source enabled when the engine key  Is in the ON position. This connection will supply power to the minusble Module when the engine key is on(dashboard on).
2) BLACK(0V). To be connected to an earth.
3) GREY(+30). To be connected to a 24V supply always available to the Existing adblue system (F4 protection fuse and the adblue system).
4) WHITE(CAN H). To be connected to CAN H of the system.
5) BROWN(CAN L). To be connected to CAN L of the system.
The connections must be made under the box of the connectors located under the protection cover of the radiator(passenger side).

The conductor of the ground of the adblue have the number 0000, but it is possible to use another ground conductor found by a multimeter.

ACTIVATION
-----------
The minusblue module and the original adblue module CANNOT both be activated at the same time, the GREY ACTIVATION WIRE(+30) is to enable the minusblue module working.

It is important to connect the GREY ACTIVATION WIRE(+30) to a 24V source always available(battery), moreover, the soldering operation must be done between the 20A fuse(F4) and the existing adblue module.

If you want to stop and exclude the original adblue module from working, all that needs to be done is to remove the F4 fuse before starting the engine.

The minusblue module will automatically be activated.
To re-instate the original adblue module, all that needs to be done is to reinstall F4 fuse before starting the engine. The minusblue module will
automatically be de-activated.

SELF LEARNING
--------------
When the minusblue module is fully connected to the electrical circuit of the original adblue module, and after identification of the F4 fuse controlling the power feeding to the original adblue module the truck batteries can be Re-connected.
The minusblue module aquires the inputs from the CANBUS the first time the dashboard is turned on(key on but engine still off).
1) Make sure the F4 fuse is inserted.
2) Turn on the dashboard(key on) and verify that the redred
 led is on.
3) After approx 1 minute the RED led will turn off and the green led will
Turn on.
4) Switch off the dashboard(key off).
After this procedure the minusblue module will be activated whenever the dashboard is turned on(key on).
The result will be:-
1) If the F4 fuse is installed the original adblue system will be working. Both red and green leds will be on.
2) If the F4 fuse is not installed the original adblue system will not be working and the minusblue module will be activated. Both red and Green led will be flashing.

NOTE:- ALL THE OPERATIONS WITH THE F4 FUSE MUST BE DONE WITH THE DASHBOARD
SWITCHED OFF(KEY OFF).

LED FUNCTION ON - OFF
----------------------
KEY OFF:- RED OFF, GREEN OFF - NO POWER FEEDING.
KEY ON:- RED OFF, GREEN OFF - TRUCK NOT SELECTED.
KEY ON:- RED ON, GREEN OFF - WAITING FOR SELF-LEARNING.
KEY ON:- RED OFF, GREEN ON - LEARNING COMPLETED.
KEY ON:- RED ON, GREEN ON - DATA SAVED, MODULE NOT ACTIVATED.
KEY ON:- RED PULSE, GREEN PULSE – DATA SAVED, MODULE ACTIVATED

OBD2Repair Offer

Wholesaler Discount: Welcome to OBD2Repair " VIP Wholesaler Order " Zone

Shipping Cost & Payment: Here is the details " shipping " " Payment "

Address problem: Receiver's address different from your Credit Card address, read " dropship "

How to order: Here is the instruction " My Account "

Tracking No.: Will email you the tracking no. once shiped, can track your parcel delivery on the net

Special Request: Pls email [email protected]

Technical Support: Free

Customer Support

     +86 13728823163

   obd2repair

   obd2repair@hotmail.com

    [email protected]